| Customization: | Available |
|---|---|
| Raw Material: | Synthetic Rubber |
| Material: | Silicone Rubber |
|
Still deciding? Get samples of US$ 50/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Founded in 2002, Dowhon Group is a modern management enterprise integrating R&D, Production, Sales and Service, headquartered in Chengdu National Industrial Park- Meishan Jinxiang Chemical Industrial Park.
Dowhon currently has 10 sets of fluoroelastomer precompound and compound production lines with total production capacity over 8,000 tons/year. We also have a 100,000 class purification workshop with 3 production lines specializing in the production of fluoroelastomer compound for smart wearable devices, annual production capacity over 3,000 tons/year. A 10,000 class purification workshop specializing in the production of FFKM rubber parts for semiconductors, aerospace,etc.
Dowhon always insists on bringing in the world's leading technology and gathering high-tech talents. We have gathered a large number of local and foreign high-end technical talents in the fields of production, R&D, and sales. To support our business, Dowhon built specialized in FFKM R&D laboratory, smart wearable engneering center and a extrusion application of fluoroelastomer research laboratory, etc.
We are strictly controlled under IATF 16949:2016, GB/T 28001-2011,GB/24001-2004. Our products are widely used in the automotive industry, semiconductor, consumer electronics, aerospace, chemical and other fields, and are also irreplaceable key materials in the cutting-edge defense industry. Our products are sold to many domestic provinces and cities, and also exported to more than 30 countries and regions such as Europe, America, South Korea, Japan, Southeast Asia, the Middle East and etc...
Fluorosilicone Rubber Z10 Series
Features:
GOOD MECHANICAL PROPERTIES
EXCELLENT SOLVENT/FLUID RESISTANCE
EASILY PIGMENTED BLENDABLE
GOOD ADHESIVENESS
RETAINS PROPERTIES OVER A WIDE TEMPERATURE RANGE FROM -60ºC~200ºC
| Item | Test Standard | Test Data | |||
| DHFSZ1040 | DHFS-Z1060 | DHFS-Z1070 | |||
| Hardness, Shore A | ASTM D2240 | 40+/-5 | 60+/-5 | 70+/-5 | |
| Tensile Strength, Mpa, Die C | ASTM D412 | ≥7 | ≥7 | ≥7 | |
| Elongation at Break, %, Die C | ASTM D412 | ≥230 | ≥200 | ≥200 | |
| Tear Strength, KN/m, Die B | ASTM D624 | ≥15 | ≥15 | ≥15 | |
| Compression Set, % 177ºC@22h, type B |
ASTM D395 | ≤15 | ≤10 | ≤10 | |
| Fuel C resistance, 23ºC@70h |
ΔV % | ASTM D471 | ≤20 | ≤20 | ≤20 |
| ΔTB % | ASTM D471 | <-60 | <-60 | <-60 | |
| ΔEB% | ASTM D471 | <-50 | <-50 | <-50 | |
| Aging by hot air, 225ºC@70h |
ΔTB % | ASTM D573 | <-45 | <-45 | <-45 |
| ΔEB% | ASTM D573 | <-45 | <-45 | <-45 | |
| Adhesion to Silicone Rubber, KN/m | / | >1.5 | >2 | >2 | |
Fluorosilicone rubber is a specialty synthetic rubber that is made through the copolymerization of methylvinylsiloxane, dimethylvinylsiloxy-terminated polydimethylsiloxane, and a small amount of vinylidene-fluoride. It has excellent properties that make it suitable for applications where standard silicone rubbers cannot be used.
Due to the addition of fluorinated groups into the silicone polymer chain, fluorosilicone rubber has very high resistance to heat, cold, oil, chemicals and compression set. It can operate continuously in temperatures ranging from -55°C to +205°C. This wide service temperature range allows it to be used in applications involving exposure to extreme hot and cold conditions.
The fluorosilicone polymer also has low surface tension, which gives cured fluorosilicone rubber an inherent release ability. This makes it an ideal material for production of sealing gaskets, o-rings, hoses and other components that are used in applications requiring adhesion prevention or easy demolding. It is commonly used as release liners and non-stick coatings in various industries.
Furthermore, fluorosilicone's oil and chemical resistance allows it to be utilized as shaft seals, diaphragms, valve stem seals and other parts in machinery used in oil fields, oil refineries and chemical processing plants. Its weathering resistance and impermeability to gases also makes it suitable for exterior seals and gaskets in vehicles, appliances and industrial equipment.
The Advantages of FVMQ:
Excellent heat and cold resistance - It can operate continuously from -60°C to +200°C, much wider than other rubbers. This makes it suitable for applications with extreme temperature fluctuations.
Outstanding chemical resistance - It has very high resistance to most oils, fuels, chemicals and solvents. This allows it to be used in harsh and corrosive environments.
Low surface tension - Cured fluorosilicone rubber has an inherent release ability due to its low surface tension. This makes it ideal for applications requiring non-stick or easy demolding properties.
Weathering resistance - It is highly resistant to UV light, ozone and other environmental factors. Components made from it can withstand long-term outdoor exposures.
Impermeability - Fluorosilicone rubber has very low permeability to gases and liquids. This provides effective sealing against leakage, seepage and permeation.
Electrical insulation - It has excellent dielectric strength and can be used for applications involving electrical insulation at high or low voltages.
Compression set resistance - Items produced from it have minimal long-term deformation under compressive load.
Aging resistance - Its properties remain stable over a very long period, extending the lifetime and maintenance intervals of products.
Biocompatibility - Grades are available that are suitable for applications in the medical, pharmaceutical and food industries.
ISO9001, ISO14001, ISO16949
Currently has 65 patents, 15 invention patents are under application, participated in the formulation of 4 National Standards.
1, What's your MOQ?
){kind=link}